11/8/2022 0 Comments Linkit practice test![]()
Let’s write our first Arduino program for the LinkIt ONE. When it’s done, flip the outer switch back to the down position for normal operation mode. #Linkit practice test upgradeWhen the following screen appears, unplug your USB cable and replug it in again and the upgrade will begin automatically: Select Tools->Burn Bootloader to launch the LinkIt ONE Flash Tool:Ĭlick the download button in the Flash Tool: Next, select Tools->Programmer->LinkIt Firmware Updater: In the Arduino IDE select Tools->Board->LinkIt ONE: Once you have that switch set correctly, plug the LinkIt ONE into your computer using a micro USB cable. #Linkit practice test updateSet the LinkIt ONE board into Mass Storage/Firmware Update mode by setting the outer switch to the up position. Next, let’s update the firmware on the LinkIt ONE board. #Linkit practice test installSearch for “link” in the search box at the top, click the row for LinkIt ONE and press the Install button: ![]() When the dialog opens it will download the latest list of compatible boards and one of them will be the LinkIt ONE. Under the Tools menu choose Board->Boards Manager.: Set the Additional Boards Manager URLs field to and then click OK: The dialogs in Arduino IDE look almost identical between Windows and Mac so I’ll just show the Mac version in the following screenshots. On the Mac it is under the Arduino menu item. This step is done entirely in the Arduino IDE so open that now. The last step in our installation phase is installing the MediaTek LinkIt ONE SDK. MediaTek says to reboot at this point (and several other points) but I’ve found it unnecessary during my installation. #Linkit practice test driverDownload and install the USB COM port driver for your OS from the links below: To communicate with the LinkIt ONE over USB we need to install a USB COM port driver. Then you’ll want to follow this Instructables post if you want to get the LinkIt ONE working on Linux. ![]() For the super ambitious, here’s the installation guide for the Arduino IDE.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |